Skip to main content

VELVET CUSTOMS

Home  Current Projects  PastProjects  MC Parts 4 Sale  Auto Parts4Sale  Services?  Tech  T-Shirts+Stickers  About Me  Trips  test   
AutoPartsMisc >  
Prices do not include shipping, unless noted.
$5. New in box Spark Plug wire kit for Dodge/Chryler V-8. Napa BeldenMax 700768. Retail is like $30.
$5 Patch Panels for El Camino and GM bed, or use them for whatever. Surface rust only.This is 80% of the lid to the smuggler's chest.
$10 Oldie but a goody, 40Ch Cobra CB radio with all the wiring.
$5. Sunpro Oil pressure gauge and a bunch of gauge stuff: single gauge panel, 3 gauge panel, Sunpro temp gauge w/ capillary tube cut off but can be repaired with new sender, and variety of fittings, parts and bulbs.
 
$5 or $11 shipped. Vintage style bakelite heater knob/switch and resistor. Kinda slick as it controls fan speed as well.
$25. 17" USA made Elec fan. Works very well, but I'm switching to mechnical. Also included is 170 degree Perma-cool thermal fan switch 19003. I used it for about 50 miles before switching to mechanical fan.
$50 Gauges from 49-50 or 51-52 Buick (never could determine which). Good candidates for restoration or parts.
  • Nice looking speedometer, complete. Cleaned up. Needle free and moves when spun. should be plug and play.
  • Ammeter, working when last checked
  • oil pressure gauge, worked but spring pressure was weak so needle didn't move readily (it is free)
  • fuel gauge, needle broken off.
  • Temp gauge, intact but someone cut the capillary tube on the back.

 
$20+10 shipped. Brand new, light blue aviation style lap belts. Aluminum buckles, quick disconnection latches on ends.
$60 M/T, vintage, Holley aluminum valve covers for small block Ford. Baffles under vents. Good physical condition, but look crusty from sitting on the shelf for awhile. Just polish them up and run.
$5 shipped. Clamp on peep mirror. Spray painted but that'll come off w/ thinner if you want.
 
$10 pickup, or $16 shipped. Standard Speedway clevis. 5/8" right hand threads and 3/8" holes. Includes jam nuts. These are $7 ea. from Speedway plus the jam nuts.
$80 (that's what I paid for them). Pretty nice set of original Ford radius rods. These are somewhere in the 32-34 range (I can't remember the specifics of the years). Minimal pitting.
 
 
 
$30. leftover speedway rear Hairpin. Tubing is threaded for 5/8" fine at all three ends. I used the other one to make a triangulated top link for my suspension. Includes the clevises.
 
$60 pickup, $100 shipped. Posies Superslide front spring 1005L. This is their super low reverse eye spring for early Ford and SuperBell I-beam axles. Used, but only a handful of miles. Shackles and pins NOT included. Typically $135 new+ shipping/tax...
 
$20. Used 21" drag link or tie rod. Has left and right hand threaded ends to accept tie rod ends or heim joints.
$30 shipped. Original early ford radius rod forgings (they are later than '33, but that's all i know off top of my
head.
 
$100 Ford Radius rods. Think they are late 32-34, but I don't know. Very good shape, minimal if any pitting. Just spray painted black. Both ends are uncut. 66.5" long end to end.
$15 pickup, 35 shipped. Bracket to mount early Mustang steering box on bottom side of Hotrod frame. Perfect if you are running four link. It's a bit crude, but very stout and a few minutes with a grinder and flap disk could clean it up nicely. Made to bolt on to frame, but can be welded.
$30 pickup, $60 shipped. Oval tube Transmission cross member w/ bolt on ends and heavy brackets. It was holding a Cadillac hydromatic, but it's pretty much universal.I think the center piece alone is typically $80 online.
$10 pickup, 16 shipped. Remnants oforiginal Model A headlight/fender brackets. Perfect start for headlight or shock mounts.
$20 Glass packs (low mileage) w/ welded chrome turn outs, and welded on rubber hangers. (the tips cost more than this).
 
Shipping only if someone can use it. Top part of f1 steering column w/ turn signal stuff inside, spring, bushing, etc. Tubing is 1.5"OD. use it to make a custom column or restore.
 
$80+30 shipping. Cadillac 390 intake manifold. Clean and ready to run. Painted w/ aluminum hi-temp paint. The heat stove has been plugged already to run Edelbrock or other aftermarket 4 barrell. Nothing wrong with it, I swapped for a multi-carb setup.
 
 
 
$7 or 11 shipped. New banjo fitting for multi carb setups of Holley 94 or Stromberg carbs. for 5/16" fuel line. New is like $16 plus shipping.
$25 shipped. New compact brass proportioning valve. Retails for 34.99 from Speedway.

$25+10 shipped. Decided to stick w/ my points and coil. New in boxAccell chrome coil (8140C). Both have been out of package but never installed. Also includes a used resistor.

$5 NOS Spectra Heater Core 94629. You can look it up but it looks like it's for 80's ford stuff, or use for a custom application. 2" thick.

 

3$ New black license plate bracket.

 

$7 Vintage PIMCO taillight and license bracket.

 

 

 

$30 for both. Two 15x4.5 steel wheels Decent condition w/ red spray bomb. 5x5.5 bolt pattern. (front wheels in the picture).
$30 for both. Two 15x5 steel wheels. Decent shape w/ red spray bomb. 5x4.5 bolt pattern (rear wheels in picture).